Hints for application of Osmo Hardwax Oil

The product is ready to apply straight from the container and is a lot more concentrated that most oils, it is designed to penetrate and fill grain to the surface in two coats.

Take care to brush or roll the product finely using a microfibre low nap roller. Take care not to saturate your roller, always roll out on the ridged part of the tray to spread before rolling onto the surface. Apply a fine even coat and then leave it alone (do not cloth back).  Exactly the same process applies when brushing or rolling smaller joinery surfaces.   Remember … it is better to spread the product a little too fine than the other way around … it is easy to apply a further 3rd coat if required.

Posted in: Our Products