Description

    Description:  Natural House Deck Oil contains plant oils, wood rosin, and extracts, impregnated with refined waxes and micro earthen pigments. The oil also contains pine oil and eucalyptus oil to give it natural fungicidal properties.  A semi transparent exterior timber finish formulated for softwoods and hardwoods such as kwila eucalyptus and jarrah. Available in fourteen colours,  Exterior Oil can also be used on any lighter coloured timbers such as treated pine and macrocarpa (half tints are available on request).  Feeds and protects against splitting, can be left to weather naturally if desired.

Note:  While our oils will protect from checking and splitting (when used in accordance with recommended recoat periods) the lighter the pigment, the more noticeable a weathering appearance from UV light and natural occurring mould spores may occur. UV degredation and mould spore development can be extreme in NZ and varies greatly depending on your timber species and in which part of the country you live.  Central Otago experiences little mould and more UV silvering, while Auckland and Northland have higher mould issues due to the rainfall and humidity.  Please familiarise yourself with ‘Expectations on Managing Mould’.

We constantly measure our oils performance against leading manufacturers.  An independent distributor and exporter of timber cladding and decking, tested and chose our Exterior Oil to give a 15 year warranty on their products.

(Order sample here)

Brief:  A deep penetrating oil made from tung and eucalyptus oils, waxes and mineral pigments for UV protection. Semi transparent  timber stain that will nourish and provide structural stability.

Use:  For preserving, staining/finishing, exterior timber cladding, decks,  joinery, rafters, fencing, lattice, pergolas etc.

Preparation:  Ensure timber is clean, dry and free of sawdust, nails or metal filings.  If accessible, apply one coat to rear side and end grain of timber cladding. This will help promote total protection.

Application:  Stir well prior and during – brush, roll, or spray on.

(for spraying – airless equipment with 18-20 thou. tip provides best delivery).

Apply two even coats – 12 hrs apart.

Within 1 hour of each coat remove any excess oil remaining above the surface, visible as wet or shiny areas.

Coverage : 1st coat 2nd coat

New Hardwoods 8-10 sqm/ltr 12-16 sqm/ltr

Softwoods 4-6 sqm/ltr 6-8 sqm/ltr

Cedar 3-4 sqm/ltr 5-7 sqm/ltr

After noting heavy weather/sun aspects, apply a third coat, 12-18 months after initial coats, to these areas as necessary.

Safety:  Keep out of reach of children.  Do not pour oil residue into the sewer. Let the remnants dry out and dispose of with your domestic rubbish collection.  Do not crumple soaked rags (otherwise spontaneous combustion may occur).

Composition:  Tung oil, isoparafin thinner, eucalyptus oil,  pine oil  canauba wax, bees wax, earthen pigments, zinc,  cobalt zirconium drier (lead free).