Description

Use:  For priming absorbent surfaces, interior solid timbers, engineered floor boards, particle board, cork, plywood, concrete and slate.  Easy to apply, Contains no biocides and is safe for man, animal and plant when dry.  Safe for children’s toys.

Preparation:  The surface must be dry, clean and free of grease. Special care should be taken to remove any dust from the pores of the timber. 

New Surfaces:  Sanding must be even and completed to a high standard.  The final sand should be medium/fine using a 120 – 150 grade paper.

Renovated surfaces:  Old, well preserved oil coatings should be thoroughly cleaned and given a light sand.   Apply one liberal application of Resin Oil Primer.    Old damaged and weathered coatings should be completely removed and then treated as a new surface.

Application:  Apply the Resin Oil  Primer liberally and evenly using a  roller, paint brush or suitable applicator. The easiest method is to pour the oil into a paint tray and apply with a 6mm nap microfibre roller on the end of an extension handle. Let dry for 12 hours  or until the floor is no longer tacky.  The primed surface is now ready to finish with two applications of either Java High Solid or Gloss Hard Varnish depending on your desired result.

Cleanup: Clean Brushes and rollers in citrus thinners or white spirit, followed by warm soapy water.

Safety Instructions:  Keep out of reach of children.  Do not pour oil residue into drains. 

Do not crumple oil soaked rags or towels, spread flat to dry (otherwise spontaneous combustion may occur).

Composition: Tung Nut Oil, Eucalyptus Oil, Carnauba Wax, Pine Rosin, Refined Isoparafin, Lead free driers.