Description: Highest quality, transparent oil preservative for all exterior timbers, such as house cladding, decks and weatherboards, pergolas, lattice, railings, fencing and posts. Added UV protection with minimal colour change to the timber. Finest ingredients … tung oil, waxes, micro earthen pigments, eucalyptus oil and pharmaceutically refined Isoparafin. Available in fourteen colours, Exterior Oil can also be used on any lighter coloured timbers such as treated pine and macrocarpa (half tints are available on request). Feeds and protects against splitting, can be left to weather naturally if desired.
Note: While our oils will protect from checking and splitting (when used in accordance with recommended recoat periods) the lighter the pigment, the more noticeable a weathering appearance from UV light and natural occurring mould spores may occur. UV degredation and mould spore development can be extreme in NZ and varies greatly depending in which part of the country you live. Central Otago experiences little mould and more UV silvering, while Auckland and Northland have higher mould issues due to the rainfall and humidity. We constantly measure our oils performance against leading manufacturers. An independent distributor and exporter of timber cladding, tested and chose our Exterior Oil to give a 15 year warranty on their products.
Coverage: 7-15 sqm/L
30ml sample : $2 (order sample here)
Brief: A deep penetrating oil made from Tung and Eucalyptus oils, waxes and mineral pigments for UV absorption. Semi transparent timber stain that will nourish and provide structural stability.
Use: For preserving, staining/finishing, exterior timber cladding, decks, joinery, rafters, fencing, lattice, pergolas etc.
Preparation: Ensure timber is clean, dry and free of sawdust, nails or metal filings.
If accessible, apply one coat to rear side and end grain of timber cladding. This will help promote total protection.
Application : Stir well prior and during – brush, roll, or spray on. (for spraying – airless equipment with 18-20 thou. tip provides best delivery).
Apply two even coats – 24 hrs apart.
Within 1 hour of the final coat remove any excess oil remaining above the surface.
Coverage : 1st coat 2nd coat. New Hardwoods 8-10 sqm/ltr 12-16 sqm/ltr. Softwoods 4-6 sqm/ltr 6-8 sqm/ltr. Cedar 3-4 sqm/ltr 5-7 sqm/ltr
Maintenance : After noting heavy weather/sun aspects, apply a third coat, 12-18 months after initial coats, to these areas as necessary.
Cleaning of implements : Immediately after use clean equipment with plant thinner or mineral turps, followed by soap and water. (for best results use a plant soap)
Safety Instructions : Do not pour oil residue into the sewer. Let the remnants dry out and dispose of with your domestic rubbish collection.
Do not crumple soaked rags (otherwise spontaneous combustion may occur)
Product can create flammable fumes during application.
Composition : Tung Oil, Pine Oil Canauba Wax, Bees Wax, Earthen Pigments, pharmaceutically refined Isoparafin, Zinc, Cobalt Zirconium drier (lead free).